By: Ilaf
| Here are some photos of another one of the homemade motorcycles that I have made. Again it is a steel rod frame, bent and welded/brazed by me. The frontend is two cast pieces to make up the triple trees and steel rod for the forks. The careful eye will see that the motor magically has part of the frame running through the rear cylinder... Well that was because I built the frame before getting those cheap motorcycles from Big Lots. The good thing is that faux-pa allows the motor to stay in the frame. Jack and Beech just seem like the guys to be doing this kind of work, hence the reason they are used. |
|
|
Back to the Photos